+- Swisslog's Forum (https://www.swisslogforwindows.com/forum)
+-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3)
+--- Forum: General discussion (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=4)
+--- Thread: Problems changing QSO (/showthread.php?tid=1131)
Problems changing QSO - DL3MIB - 12-10-2023
I have problems when I want to change a saved QSO.
I call up the QSO with a double click in the "Logbook" window, the selected QSO then appears in the "Change QSO" window.
After about 2 seconds the QSO in this window disappears again before I can even make a change.
What could be the reason?
Thanks for your help
73 de Peter, DL3MIB
RE: Problems changing QSO - EA3GCV - 13-10-2023
Hi Peter,
This happens because Swisslog is linked with WSJT-X / JTDX (UDP button is green) then QSO entry is following the DX Call from these programs. When you want to edit or work QSOs in other modes different from FT8cyou need to either disable the UDP link by pressing the UDP button or close WSJT-X / JTDX.
Please read carefully this chapter where all this is explained:
https://www.swisslogforwindows.com/english/Help/Features/HamScope%20Support.htm#WSJTOptions
Best 73