Swisslog + DxLab Commander + JTDX - Printable Version +- Swisslog's Forum (https://www.swisslogforwindows.com/forum) +-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3) +--- Forum: General discussion (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=4) +--- Thread: Swisslog + DxLab Commander + JTDX (/showthread.php?tid=1174) |
Swisslog + DxLab Commander + JTDX - on6dp - 12-03-2024 Hallo, I have installed DXLab Commander and JTDX with Swisslog of course on my FTDX101MP and use the USB COM given by the TRX The problem is that in swisslog the transceiver interface just display the band like 7 14 21 28 .....and not the entire frequency like 7.123 IN JTDX and DXLab commander, there are no problem The entire frequency is well displayed Anybody can help me ? Thanks in advance 73 Paul, ON6DP RE: Swisslog + DxLab Commander + JTDX - EA3GCV - 12-03-2024 Hi Paul, I have just tested with latest DXLab Commander version and I can see the frequency normally. Could you please add a screenshot of your issue? Since I implemented DX Lab Commander all was working well so your issue is very weird. Swisslog reads what DXLab Commander sends. 73 RE: Swisslog + DxLab Commander + JTDX - on6dp - 12-03-2024 Halloo Jordi, Enclosed a screenshot I have a FTDX101MP Thanks for help 73 Paul, ON6DP / OP0P RE: Swisslog + DxLab Commander + JTDX - EA3GCV - 13-03-2024 Hi Paul, I found the bug! in countries using a space as thousand separator (like yours) DX Lab Commander sent this separator as a very special character (ASCII 160) instead of a space, causing this very weird issue. It's corrected in last beta just released today. Best 73 |