Error after Update to 5.94 - Printable Version +- Swisslog's Forum (https://www.swisslogforwindows.com/forum) +-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3) +--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6) +--- Thread: Error after Update to 5.94 (/showthread.php?tid=289) |
Error after Update to 5.94 - OE1GQA - 20-12-2016 When I try to Save ( Speichern ) a Log I get an error : RE: Error after Update to 5.94 - EA3GCV - 20-12-2016 Hello, You are probably using Windows Vista and higher, you have installed Swisslog in the Program Files folder and you installed the previous version of Swisslog without disabling UAC nor installing as administrator. This causes that you are not working in C:\Program Files\Swisslog but in another folder and the new version has not been able to update your working files. Please read this thread I posted in the forum where I explain all this and the solution: http://www.swisslogforwindows.com/forum/showthread.php?tid=205 Best 73 Jordi, EA3GCV RE: Error after Update to 5.94 - OE1GQA - 21-12-2016 Hi Jordi Thank you for your quick answer I am running Windows XP, is it the same problem there ? 73 Guenter, OE1GQA RE: Error after Update to 5.94 - EA3GCV - 21-12-2016 Hello Guenter, Under Windows XP you should not have this problem at all! From which version you were upgrading? Please download and run again the installer. This error appears because the SWLCTRY file has not been replaced by the new one. Maybe you have moved the SWLCTRY to a different folder other than DB and this should not be done. If this is the case find out where you have the SWLCTRY file and replace it by this one: http://www.swisslogforwindows.com/Download/Swlctry.zip Unzip and overwrite it where you have the SWLCTRY. To avoid future problems the SWLCTRY MUST BE located in the DB folder (inside the folder where Swisslog is installed). Also the SWLSTAT.MDB file MUST be located where the Swisslog program file is located. Best 73 RE: Error after Update to 5.94 - OE1GQA - 21-12-2016 Hi Jordi thanks for your reply I have upgraded from 5.93 and this version was running fine but maybe I can give another information to you: I was working in JT65 with WSJTX and had automatic transferred the log to swisslog and you can see it in the screenshot, then I could not "Save" the log ... I will have a look to the swlctry file now ... 73 Guenter RE: Error after Update to 5.94 - EA3GCV - 21-12-2016 Hello Guenter, I also use the link to save QSO from WSJT-X and works perfectly here (you have not attached any screenshot). Where do you have Swisslog installed? The "bureau" error clearly indicates that the upgrade has not been properly done and the SWLCTRY file has not been updated. You won't be able to Save any QSO until you use all recent files. Also make sure that your firewall is not blocking Swisslog or WSJT! communication from/to Swisslog/WSJT are made via UDP port so make sure that your firewall is not blocking any incoming/outgoing connections! Some antivirus use to block nearly everything! If you still have problems we can arrange a remote session via Teamviewer. Download Teamviewer Quick Support here: http://www.swisslogforwindows.com/Download/TeamViewerQS_es.exe No installation needed, just copy it in your desktop, run it and send me the ID and password. You can send it to me via whatsapp to my phone number +34 656409020 or by e-mail. I will be QRV until 15 UTC. Best 73 RE: Error after Update to 5.94 - OE1GQA - 21-12-2016 Hi Jordi Thank you very much for your help I will try by myselfe and will see if I can fix the problem, otherwise I will contact you again I know Teamviewer, I am running my complete station remote via Teamviewer :-) tnx es 73 de Guenter RE: Error after Update to 5.94 - OE1GQA - 21-12-2016 I did a complete new installation of version 5.94, now it is running perfect tks es 73 de Guenter RE: Error after Update to 5.94 - EA3GCV - 22-12-2016 Perfect! |