S-Meter CAT COM IC-7610 5.108 Beta Jan+Feb-24

[EA3GCV]

Hi Erich,

Theoretically, when the CI-V transceiver is ON, the transceiver is sending the frequency or mode when it's changed. So if you set a new frequency with the buttons in the transceiver window, radio should send this parameter. However you can apply a low polling (let's say 10 which is 1 second). Although the CI-V transceive is ON Swisslog will poll the transcevier every second. The key here is not having a lot of traffic in the COM port to avoid issues.

Best 73