Swisslog 5.100e + WSJT-X v2.2.2

[EA3GCV]

Hello Clive,

In the WSJT-X UDP settings of Swisslog you have the set the same port you assigned in WSJT-X UDP Server. Default is 2237 but in your case you have to set 2241 which is the port to have assigned. Enable the Forwarding checkbox to broadcast all info received by WSJT-X into another port (default 2332 but you can set any other). Disable UDP secondary server in WSJT-X. You don't need it.

In Grid tracker set the forwarding port of Swisslog (2332) in the "Receive UDP messages" option and do not check Multicast!. 

This way Swisslog will receive all data from WSJT-X and WSJT-X will receive data sent from Swisslog. Grid tracker will receive data from the Swisslog's forwarding port. Here is the data flow schema:

WSJT-X <----- 2241 port ----> SWISSLOG > ---- 2332 port  ----< GRIDTRACKER

Best 73