IMPORTANT!!! READ THIS BEFORE YOU UPDATE SWISSLOG

[AK1MD]

I am trying to connect DX Telnet with Swisslog. Unfortunately in the Active Servers List there is no DX Telnet server listed. Could you please send me the information to plug into the Servers List?
Thank you, Alex AK1MD


Start DXTelnet TCP/IP connection with SWISSLOG

start DXTelnet

in DXTelnet perform the following steps:

select Session ¦ Site List...

in the Site List select Accept-1

switch to SWISSLOG

in SWISSLOG perform the following steps:

open the Telnet Control window (View ¦ Telnet Control Window)

activate the Available Servers Page

from the Active Servers list select the DXTelnet Server and press the Connect button

now SWISSLOG and DXTelnet are connected

You can start as many DXTelnet session you want. The traffic of all DXTelnet sessions is sent to SWISSLOG. But make sure that you not stop the very first DXTelnet instance (Acccept-1), because this is the relay through which information between DXTelnet and SWISSLOG is exchanged.