Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Swisslog 5.100e + WSJT-X v2.2.2
17-10-2020, 11:28 AM,
#1
Swisslog 5.100e + WSJT-X v2.2.2
I have been trying to resolve a few around the networking so finally decided the answer was to read the documentation!..this does not mean I have interpreted it 100% correctly..

- IC7300 all working fine with Omnirig.
- Swisslog config - The main program is set to WSJTX and I am using port 2241 and I have forwarding enabled on 2332. No other programs are active.
- WSJT-X config reporting - UDP server has all items ticked and also set to port 2241. I have left the secondary UDO server enabled on port 2333 but not in use.

WSJT to Swisslog logging is working 100%

Please can someone confirm I have correctly configured both programs ?

Problems
1) The Swisslog bandmap is not populating and remains blank ?
2) How do I configure Grid Tracker to work with the above?  after reading the documentation I understand port 2241 cannot be shared so it will not pick up the data?

Any help appreciated.

Clive
Reply
17-10-2020, 11:59 AM, (This post was last modified: 17-10-2020, 12:05 PM by EA3GCV.)
#2
RE: Swisslog 5.100e + WSJT-X v2.2.2
Hello Clive,

In the WSJT-X UDP settings of Swisslog you have the set the same port you assigned in WSJT-X UDP Server. Default is 2237 but in your case you have to set 2241 which is the port to have assigned. Enable the Forwarding checkbox to broadcast all info received by WSJT-X into another port (default 2332 but you can set any other). Disable UDP secondary server in WSJT-X. You don't need it.

In Grid tracker set the forwarding port of Swisslog (2332) in the "Receive UDP messages" option and do not check Multicast!. 

This way Swisslog will receive all data from WSJT-X and WSJT-X will receive data sent from Swisslog. Grid tracker will receive data from the Swisslog's forwarding port. Here is the data flow schema:

WSJT-X <----- 2241 port ----> SWISSLOG > ---- 2332 port  ----< GRIDTRACKER

Best 73
Jordi, EA3GCV
Current developer of Swisslog
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)