Hello all,
The new TQSL 2.0 works perfectly (based on my onw testings and other user's experience too).
However be aware to assign the field C_NOTE or L_NOTE when asked to assign the field APP_LOTW_MODEGROUP.
Best 73
(17-11-2013, 07:06 PM)ea3gcv Wrote: [ -> ]Hello all,
The new TQSL 2.0 works perfectly (based on my onw testings and other user's experience too).
However be aware to assign the field C_NOTE or L_NOTE when asked to assign the field APP_LOTW_MODEGROUP.
Best 73
Well, I decided to upgrade to TQSL 2.0 and now I receive an access violation at address 00000000 error in Swisslog when it tries to execute the sign QSOs stage. Uploading the QSOs within TQSL itself works OK but not Swisslog. Anyone help?
Reg
Hello:
Which operating system are you using? If newer than XP you MUST install & run Swisslog with administrator rights. The same applies to all programs if you don't disable the UAC (User Account Control).
Check with TQSL that all certificates are properly installed and all the Stations assigned to Swisslog's My QTH.
Best 73
Hi to all
Also same problem in my PC with XP, my friend Samu, EA1DLU, also he have a same problem.
Return to 1.13 and works fine.
73, Pedro
I have also gone back to version 1.13 and it seems OK now.
I am using windows 8.1 64 bit with Swisslog run as administrator and TQSL certs properly installed. I could sign, upload and download OK from within TQSL version 2 but got the error messgae when trying to sign QSOs from within Swisslog.
73
Reg G3WPF
Are you executing Swisslog with administrator rights too? It's very important to avoid problems! I will check in my system with Windows 8.1 64 bits too and I will let you know...
Hi,
Just tested in my system with Windows 8.1 64 bits and TQSL 2.0 and another installations with Windows XP in a virtual machine with no problems at all... There is a configuration file update with TQSL. Run TQSL and Help | Check for updates. However before updating everything worked well too...
Ensure that ALL programs has been installed with administrator rights and that you have disabled UAC. Probably it's a bug in Swisslog or TQSL 2.0 because some users are getting this error... however others not... can't give you more details at the moment!
Best 73 and happy new year!
Hello
I changed my PC, I'm with WIN 7 64 as with the old PC, I installed Swisslog 5.8 versioned TQSL tqsl - 2.0.3.msi, I also have the same violation error "" violation at address 00000000 error "". I could import into Swisslog 174 QSO LOTW without problem. But impossible to sign the QSO exported.
Damage I did retain the old version 1.13 TQSL which was no problem operating LOTW, on the web site ARRL the 2.03 is only available.
I have exactly the same parameters LOTW and Swisslog as before the change of PC. I use Swisslog since 1989 (25 years) DOS version and I follow all updates. It is impossible for me to use an other LOG that Swisslog.
If you could help me I would be grateful
Thank you very much
Phil F6DDR
Hi Phil,
After many feedback from many users I can confirm that TQSL version 2 is not working for Swisslog. New version 2.0.3 is not working for me neither (when previous version 2 worked well).
So the only solution is installing TQSL 1.13 again. Download from the following link:
http://www.spanish.icap.ch/tqsl-113.exe
Best 73