Swisslog's Forum

Full Version: SWISSLOG 5.8 and TS-590S
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hello,

does someone use an TS-590S with SWL v5.8?

I can not solve the connection. RS-232 and USB behave simmilar. The radio Window displays the frequency and mode correctly and can switch the mode right, but in the logging window I see randomly no mode or FM instead SSB or CW and the QSO is logged with wrong mode informaion.

Any advice please?

Many thanks in advance.

Best regards.


George OK2KG
(06-06-2013, 01:53 PM)jdostal Wrote: [ -> ]Hello,

does someone use an TS-590S with SWL v5.8?

I can not solve the connection. RS-232 and USB behave simmilar. The radio Window displays the frequency and mode correctly and can switch the mode right, but in the logging window I see randomly no mode or FM instead SSB or CW and the QSO is logged with wrong mode informaion.

Any advice please?

Many thanks in advance.

Best regards.


George OK2KG


Hi George,

please check if "mode" change with different frequency or band. I did a setup that for my FT450 under SWL, for 6m for example I have mode=CW between 50090 - 50110, SSB 50110 - 50225, JT6M 50226 - 50240 and so on. I need to check and remember where you can map frequency = mode, my memory is very poor atm.

Please check and let me know !

br, Pietro
(06-06-2013, 05:38 PM)hb9rxc Wrote: [ -> ]
(06-06-2013, 01:53 PM)jdostal Wrote: [ -> ]Hello,

does someone use an TS-590S with SWL v5.8?

I can not solve the connection. RS-232 and USB behave simmilar. The radio Window displays the frequency and mode correctly and can switch the mode right, but in the logging window I see randomly no mode or FM instead SSB or CW and the QSO is logged with wrong mode informaion.

Any advice please?

Many thanks in advance.

Best regards.


George OK2KG


Hi George,

please check if "mode" change with different frequency or band. I did a setup that for my FT450 under SWL, for 6m for example I have mode=CW between 50090 - 50110, SSB 50110 - 50225, JT6M 50226 - 50240 and so on. I need to check and remember where you can map frequency = mode, my memory is very poor atm.

Please check and let me know !

br, Pietro

Hello Pietro,

many thaks for your answer. I have my Swisslog set propperla, as when I use other TRX like IC-7000 od FT-817 directly conected to Swisslog, all is running fine. When I use HRD for the TS-59S and connect it this way to Swisslog, all is running fine also.
Some years ago I used TS-2000 with Swisslog without any problem. Somethinng had probably changed in the Kenwood protocol.

Best 73!

George OK2KG