+- Swisslog's Forum (https://www.swisslogforwindows.com/forum)
+-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3)
+--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6)
+--- Thread: Problems with 1 June Beta (/showthread.php?tid=1358)
Problems with 1 June Beta - EI4KF - 01-06-2026
I installed the new beta from 1 June and now have problems with delays on some actions.
If I click a callsign in JTDX, in this version the call comes to the Statistic Overview window but then disappears and reappears, which has always happened before quite quickly but now is with a delay. If I click on a callsign in a DX Messages window, there is a delay before the call comes to Statistic Overview.
The launching of Swisslog in this version takes longer than normal.
Register of QSL Cards: the window opens but is not immediately populated.
Prior to posting this report I had rebooted the computer and compacted my database to rule out extraneous factors. I also reverted to the 29 May beta and do not see this issue in that version.
I have attached a zipped video that may help visualise some of the problem.
Erik.
SwisslV5_dDQmRbcLNh.zip (Size: 3,77 MB / Downloads: 1)
RE: Problems with 1 June Beta - EA3GCV - 03-06-2026
Hi Erik,
I did a mistake and the statistic refreshing was applied many times during a callsign change process which, of course, affected performance a lot. The statistc refreshing routine must be applied only once after saving or deleting a QSO in order to show correct statistic values. As it was up to now, the statistic status (needed, worked, confirmed) never changed during the session. I have just released a beta fixing this. I have been testing all the day with no performance issues at all.
73