insert new mode - Printable Version +- Swisslog's Forum (https://www.swisslogforwindows.com/forum) +-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3) +--- Forum: Wish list (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=24) +--- Thread: insert new mode (/showthread.php?tid=326) Pages:
1
2
|
RE: insert new mode - EA3GCV - 11-09-2017 Hi Arne, Could you explain better what's your problem? I don't understand what you want to explain. Reinstall your MicroHam drivers if you don't have accesa to the MicroHam control panel to setup transceiver COM port. Best 73 RE: insert new mode - OZ4VW - 12-09-2017 Good evening will try to Set up in the moment Swisslog 5.96 MicroHam 2R+ controlling to station controlled via Omnirig have the small window in top First picture is before logging QSO from WSJT-X remark frequency window Second picture is after the small window have been there and I say OK Frequency left and it is not coming back before restart of Swisslog Off some reason Im not able to insert picture but they are in the attachment Br Arne RE: insert new mode - EA3GCV - 13-09-2017 Hi Arne, Do you mean that after logging QSO in WSJT-X the frequency in the transceiver toolbar of Swisslog disappear as displayed in the second screenshot? Have you configured WSJT-X to use Omnirig and read ok thine frequency from the transceiver? You have to use Omnirig in WSJT-X this way you will share the transceiver control in both Swisslog and Omnirig without any problems. Send me screenshots of your transceiver setup in WSJT-X but it's not normal that after logging the QSO in WSJT-X the QRG readout in Swisslog disappear. Please make sure you are using OmniRig in both programs to avoid problems with CAT control. If you still have problems we will have to arrange a remote session via Teamviewer to see online what's happening but it should work perfectly. Best 73 RE: insert new mode - OZ4VW - 13-09-2017 Hello Jordi Yes Im using Omnirig for both program Have TS870 and FT-857 so I shift direct radio in the small window in Swisslog This work pretty good Will tomorrow make screenshot to veryfy it Br Arne OZ4VW |