SETUP FT-2000 - Printable Version +- Swisslog's Forum (https://www.swisslogforwindows.com/forum) +-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3) +--- Forum: General discussion (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=4) +--- Thread: SETUP FT-2000 (/showthread.php?tid=486) |
SETUP FT-2000 - ik8yfu - 16-09-2018 I can not set Yaesu FT2000 correctly with Swisslog. I have an SB-2000 interface. I attach the screen: where am I wrong? RE: SETUP FT-2000 - EA3GCV - 16-09-2018 Hello, Set 4800 bauds and 2 Stop bits instead of 1. Also uncheck the Dtr/Rts checkboxes. I recommend to use OmniRig (free) or VSPE (Virtual Serial Port Emulator if you want to setup directly to a COM port) if you need to share CAT with other programs such as WSJT-X, MixW, etc. Otherwise you will get COM port conflicts. Best 73 RE: SETUP FT-2000 - ik8yfu - 16-09-2018 Changing this: DTR/SDR and RTS/CTS Force Off it works. Thank you |