+- Swisslog's Forum (https://www.swisslogforwindows.com/forum)
+-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3)
+--- Forum: General discussion (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=4)
+--- Thread: FT4 statistic not displaying proporly (/showthread.php?tid=622)
FT4 statistic not displaying proporly - on6cc - 26-08-2019
Hi Jordi,
FT4 can be detected in the 'DX messages' windows, but it doesn't display the correct statistic in the 'statistic Quick view' window. It shows "worked' but not confirmed (confirmed from LOTW), like indicated in the screenshots below.
Must I make a new statistic for FT4, or import it? The FT8 statistic works as you can see....
73 Marc
RE: FT4 statistic not displaying proporly - EA3GCV - 26-08-2019
Hello Marc,
Mode is only detected from DX spots in 2 cases:
- You have defined a band plan including frequencies especific to FT4
- FT4 mode is included especifically in the spots comments.
I recommend you to add a new plan band as defined by Eric EI4KF (see this post: https://www.swisslogforwindows.com/forum/showthread.php?tid=615).
Best 73
RE: FT4 statistic not displaying proporly - on6cc - 26-08-2019
(26-08-2019, 07:51 PM)EA3GCV Wrote: Hello Marc,
Mode is only detected from DX spots in 2 cases:
- You have defined a band plan including frequencies especific to FT4
- FT4 mode is included especifically in the spots comments.
I recommend you to add a new plan band as defined by Eric EI4KF (see this post: https://www.swisslogforwindows.com/forum/showthread.php?tid=615).
Best 73
But Jordi this is not a statistic based on DX spots but of real imported LOTW data. FT8 import works but FT4 import doesn't. Maybe something goes wrong with the import of the LOTW sychronisation?
73's
RE: FT4 statistic not displaying proporly - EA3GCV - 27-08-2019
Hello Marc,
Have you checked the real status of the LOTW received field for such QSOs? double click in the cell to display the associated QSO to this statistic status and check the value of the LOTW received field. If you uploaded FT4 QSOs while LoTW didn't recognise FT4, QSOs were mapped to DATA mode. In this case, you have to upload again all FT4 QSOs (by clearing the LoTW status field) in order Swisslog will upload again these QSOs correctly and match the right QSOs in LoTW. It's very important you have the latest TQSL!
Best 73
RE: FT4 statistic not displaying proporly - on6cc - 01-09-2019
Hello,
I tried about everything to get my LOTW QSL's imported from the ARRL site but still can't get any QSL's from LOTW imported....
I made some screenshots. There must be something wrong with the handeling of 'DATA' MFSK' and 'FT4' discription. The last thing I can do is deleting all the FT4 QSO's in my log and import them through TQSL....
73's
RE: FT4 statistic not displaying proporly - EA3GCV - 03-09-2019
Hello,
I have just released a new version correcting this issue! You have to delete your mapping about DATA, FT4 and MFSK!
Best 73
RE: FT4 statistic not displaying proporly - on6cc - 03-09-2019
(03-09-2019, 01:47 AM)EA3GCV Wrote: Hello,
I have just released a new version correcting this issue! You have to delete your mapping about DATA, FT4 and MFSK!
Best 73
Hello Jordi,
Again great job from you! All OK now! Thanks from the effort!
Marc, ON6CC, OR3A