+- Swisslog's Forum (https://www.swisslogforwindows.com/forum)
+-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3)
+--- Forum: General discussion (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=4)
+--- Thread: Problems uploading FT4 qsos to LOtW from JW6VDA (/showthread.php?tid=647)
Problems uploading FT4 qsos to LOtW from JW6VDA - JW6VDA - 22-10-2019
In the uploading process, the programme asks for the LOTW mode for SWL mode FT4. Why is this, and what must I do?
73 de Tom, now in Svalbard as JW6VDA
RE: Problems uploading FT4 qsos to LOtW from JW6VDA - F6DKQ - 22-10-2019
(22-10-2019, 11:36 AM)JW6VDA Wrote: In the uploading process, the programme asks for the LOTW mode for SWL mode FT4. Why is this, and what must I do?
73 de Tom, now in Svalbard as JW6VDA
Hi,
I mapped it to MFSK and it seems to work so..?
LOTW synch/settings/modes
73 de Guy F6DKQ
RE: Problems uploading FT4 qsos to LOtW from JW6VDA - EA3GCV - 23-10-2019
Hi,
You don't have to map anything because TQSL already knows FT4! This had to be done before FT4 was accepted! Now your issue comes because you have to update TQSL to the latest version 2.4.7 with latest configuration file. Afterwards delete your own mappings. It's very important to update TQSL when a new mode appears because TQSL is used to do the LoTW synchronization.
Best 73
RE: Problems uploading FT4 qsos to LOtW from JW6VDA - on6dp - 06-11-2019
Hallo Jordi,
I have the problem with FT4. it's automatically transform to MFSK mode when Swisslog is connected to JTDX for example . The alone solution I have found it's to reencode manually the right mode FT4 in place of MFSK, but the automatic QSL sending is on MFSK
I can I have a solution to have the FT4 directly and not MFSK
Can you help me ?
The TQSL is the lastest version on my computer
Thns
73 Paul, ON6DP
RE: Problems uploading FT4 qsos to LOtW from JW6VDA - EA3GCV - 08-11-2019
Hello Paul,
Are you using latest Swisslog version 5.99d? I use JTDX with FT4 mode and is trasnferred correctly into Swisslog. Also the LoTW synch works perfectly (you have to use latest TQSL with latest configuration file) and delete the manual mapping of mode MFSK to FT4.
If you still have this issue please send me a detailed explanation or contact me via whatsapp to arrange a teamviewer session (+34 656409020).
Best 73
RE: Problems uploading FT4 qsos to LOtW from JW6VDA - JW6VDA - 08-11-2019
It was simply an old version (from last year) of the configuration for TQSL in tghe local computer at the operating site in Svalbard. Problem is no problem.
73 de Tom