Swisslog's Forum
QSL statut on HDRLog - Printable Version

+- Swisslog's Forum (https://www.swisslogforwindows.com/forum)
+-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3)
+--- Forum: General discussion (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=4)
+--- Thread: QSL statut on HDRLog (/showthread.php?tid=650)



QSL statut on HDRLog - f8bje - 01-11-2019

Hello to all. My problem is this: I downloaded my log from Swisllog to HDRLog. It woks fine.
Bt when I set QSL statut in "received" for QSO's in Swisslog, the QSL staut is not taken into account on HDRLog. How to do ?

Thank you in advance. 73


RE: QSL statut on HDRLog - EA3GCV - 01-11-2019

Hello,

I don't understand when you say "downloaded". You can only "upload" QSO from Swisslog to HRDLOG.

If you change the QSL received indicator in Swisslog AFTER you have uploaded the QSOs to HRDLOG, you will have to Upload all QSOs again. But first you have to set the field L_HRDLOG_QSO_UPLOAD_Status to 0 (Swisslog will only upload QSOs not uploaded previously and this field is used to handle this):

- Go to View / Logbook view (selection)
- Select the query Status Online logbook from the Logbook folder.
- Filter the HRDLOG_QSO_UPLOAD_STATUS to display all QSOs having 1 (checked). Open the arrow in this field and select 1.
- Afterwards, mouse right click on any content of this field (not the field header) then select Edit / Change all QSOs
- Set 0 to this field and press OK to all confirmation messages. All filtered QSOs will be set to 0.

Now you can Upload again all your logbook into HRDLOG from Tools / HRDLOG > Upload logbook.

Please read the chapter Multipe QSO Update from the Swisslog help or click on the following link:

https://www.swisslogforwindows.com/french/Help/Multiple%20QSO%20Update.htm

Best 73


RE: QSL statut on HDRLog - f8bje - 02-11-2019

Hello Jordi, yes I wanted to say "upload" to HDRLog. And thanks, it works fine. 73