Swisslog's Forum
FlDigi ver4.1.08 - Printable Version

+- Swisslog's Forum (https://www.swisslogforwindows.com/forum)
+-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3)
+--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6)
+--- Thread: FlDigi ver4.1.08 (/showthread.php?tid=683)



FlDigi ver4.1.08 - DL1IP - 14-01-2020

Hi Jordi,
Have a problem with Fldigi-4.1.08 and 4.1.09, the frequency
is not adopted. I have the problem alone.
Best wishes
Karl DL1IP


RE: FlDigi ver4.1.08 - EA3GCV - 14-01-2020

Hi Karl,

Are all other fields traspassed into Swisslog? Which transceiver control are you using in Swisslog and FLDIGI? Did this work in previous versions of FLDIGI or it's the first try to setup FLDIGI and Swisslog?

Please explain in detail in order to know what may happen.

Best 73


RE: FlDigi ver4.1.08 - DL1IP - 14-01-2020

Yes, all other fields in Swisslog are adopted. Everything worked with Ver 4.1.07 FLDIGI versions.
No transceiver control in Swisslog.
In FlDigi Hamlib Yaesu Ft2000.
My friend DL2IR has the same problem.
73 dl1ip


RE: FlDigi ver4.1.08 - EA3GCV - 16-01-2020

Hello,

I will install new FLDIGI version tomorrow and I will check. As I understand, with 4.1.0.7 works well and frequency is traspassed is that right??

73


RE: FlDigi ver4.1.08 - DL1IP - 16-01-2020

(16-01-2020, 12:15 AM)EA3GCV Wrote: Hello,

I will install new FLDIGI version tomorrow and I will check. As I understand, with 4.1.0.7 works well and frequency is traspassed is that right??

73

Yes Jordi that is right. 4.1.0.7 works ufb..
Thank you for the fast feedback.

73 DL1IP Karl


RE: FlDigi ver4.1.08 - EA3GCV - 16-01-2020

Hello Karl,

I have installed version 4.1.0.8 and 4.1.0.9 and here is working perfectly. However, I have found the reason of this bug: Since version 4.1.0.8 FLDIGI uses the decimal separator defined in the Windows Regional settings for the log frequency. You will see that since version 4.1.0.8 your Freq field contains a comma instead of a dot. There are many Europeans countries (like Germany) using a comma instead of a dot and that causes this bug. I have uploaded a Beta correcting this:

www.swisslogforwindows.com/Beta/SwisslV5.exe

Simply download and REPLACE this file in the Swisslog folder. It should work now. Inform the other German user having the same problem. 

Best 73


RE: FlDigi ver4.1.08 - DL1IP - 16-01-2020

(16-01-2020, 12:40 PM)EA3GCV Wrote: Hello Karl,

I have installed version 4.1.0.8 and 4.1.0.9 and here is working perfectly. However, I have found the reason of this bug: Since version 4.1.0.8 FLDIGI uses the decimal separator defined in the Windows Regional settings for the log frequency. You will see that since version 4.1.0.8 your Freq field contains a comma instead of a dot. There are many Europeans countries (like Germany) using a comma instead of a dot and that causes this bug. I have uploaded a Beta correcting this:

www.swisslogforwindows.com/Beta/SwisslV5.exe

Simply download and REPLACE this file in the Swisslog folder. It should work now. Inform the other German user having the same problem. 

Best 73
Hi Jordi

everything is running fine now

Thank you very much

tnx  73
DL1IP Karl