+- Swisslog's Forum (https://www.swisslogforwindows.com/forum)
+-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3)
+--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6)
+--- Thread: QTH-Locator in CallBook wrong - hanging of SwissLog (/showthread.php?tid=768)
QTH-Locator in CallBook wrong - hanging of SwissLog - dk4rh - 31-07-2020
I have running swisslog with WSJT-X.
Sometimes a QSO can´t be stored. Reason is, that the CallSign has an incorrect QTH-Locator is stored (think in HamQTH), and Swisslog fill the field with those wrong information - just giving an error that those is wrong.
Sometimes it is enough to press the "OK" buttom - but sometimes directly the wrong information is set again.
In the FT8-Dialogue the CallSign is send with correct 4-digit locator information.
Example 2E0ERL
Could it be possible maybe with an option simple to ignore QTH-Locator information with syntax issues ?
73 Roland
Attached an example. But was also happened with a view other Callsign
RE: QTH-Locator in CallBook wrong - hanging of SwissLog - EA3GCV - 02-08-2020
Hello Roland,
You have really found a very strange case! It's obvious this colleague has set wrongly his QTH locator in his HAMQTH profile. I have never found myself a case like this and I guess you won't find a case like this often. However I have added a QTH locator check when reading from callbook databases and in case it's wrong, it won't be copied and no warning message will be released. I have uploaded a beta here implementing this correction:
www.swisslogforwindows.com/Beta/SwisslV5.exe
Simply download and replace this file in the Swisslog folder.
Best 73
RE: QTH-Locator in CallBook wrong - hanging of SwissLog - dk4rh - 09-08-2020
Hi Jordi
thanks. Sorry, have seen this information yet.
Shall I try this version, or is it already included in version 5.100c which came out later on?
73 Roland, DK4RH
RE: QTH-Locator in CallBook wrong - hanging of SwissLog - EA3GCV - 10-08-2020
Hi Roland,
If you read the release notes you will see that this fix is included in 5.100c.
Best 73
RE: QTH-Locator in CallBook wrong - hanging of SwissLog - dk4rh - 11-08-2020
Thanks. Can write was not happened after update to 5.100c.
RE: QTH-Locator in CallBook wrong - hanging of SwissLog - EA3GCV - 11-08-2020
Hi Roland,
Are you having any issues after updating to 5.100c?
Best 73
RE: QTH-Locator in CallBook wrong - hanging of SwissLog - dk4rh - 12-08-2020
No, is running very well!
Thanks!
73 Roland, DK4RH