QSO Not logged in QRZ - Printable Version +- Swisslog's Forum (https://www.swisslogforwindows.com/forum) +-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3) +--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6) +--- Thread: QSO Not logged in QRZ (/showthread.php?tid=810) |
QSO Not logged in QRZ - hb9dhg - 20-10-2020 Dear Jordi, I get the following error message when I try to modify a QSO (see attached) Is this because I've a two-factor authentication on QRZ.com or there is anything wrong on my own. Sorry for the bother. HB9DHG Fulvio RE: QSO Not logged in QRZ - EA3GCV - 20-10-2020 Hello Fulvio, QRZ doesn't allow edition via its API! Please read: http://www.swisslogforwindows.com/english/Help/Features/Online%20Logbooks.htm Only Cliub Log, HRDLOG and HAMQTH allow online edition. Best 73 RE: QSO Not logged in QRZ - hb9dhg - 20-10-2020 (20-10-2020, 01:49 PM)EA3GCV Wrote: Hello Fulvio, Thanks Jordi, Are you confirming that the QSO has been already uploaded to QRZ.com? I knew that you can't updated a QSO via its API. Is there a way to avoid this message after any change (especially the mod I was made is simply the DOK reference). Let me know at your earliest convenience. No rush at all. Fulvio HB9DHG RE: QSO Not logged in QRZ - EA3GCV - 21-10-2020 Hello Fulvio, You can disable error messages for every online service (by default is activated) . Please read the Online Logbooks chapter in the Swisslog help (the configuration section for every online service) where all this is explained: http://www.swisslogforwindows.com/english/Help/Features/Online%20Logbooks.htm#QRZ Best 73 RE: QSO Not logged in QRZ - hb9dhg - 21-10-2020 (21-10-2020, 03:11 AM)EA3GCV Wrote: Hello Fulvio, Excellent! I din't pay attention to this important detail. Thank you for your guidance and help. Fulvio HB9DHG |