+- Swisslog's Forum (https://www.swisslogforwindows.com/forum)
+-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3)
+--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6)
+--- Thread: double click in the statistics (detail table) no qso's are displayed (/showthread.php?tid=996)
double click in the statistics (detail table) no qso's are displayed - dl1smm - 03-06-2022
Hello,
I installed the latest version (5.103) on my new computer.
Then i copied the logbook file to the swisslog folder.
Swisslog runs without problems. all qso's are there.
But with a double click in the statistics (detail table) no qso's are displayed.
DB-Version on my Database: 0544
73 de Max DL1SMM
RE: double click in the statistics (detail table) no qso's are displayed - EA3GCV - 03-06-2022
Hi Max,
Send me a copy of your database to support@swisslogforwindows.com (zip or rar or create a backup in LZH in File / Save...).
Best 73
RE: double click in the statistics (detail table) no qso's are displayed - dl1smm - 04-06-2022
Hello Jordi,
i have send you my Database (Maegge at online.de)
Thanks 73 de Max DL1SMM
RE: double click in the statistics (detail table) no qso's are displayed - EA3GCV - 06-06-2022
Hello Max,
You have 1920 QSOs with no MY QTH assigned and that’s the reason of your issue. Do the following:
- View / Logbook view (selection)
- Select the Logbook with DXCC, Zones and My QTH query from the Logbooks folder
- Now locate the My QTH field, open the filter (the arrow in the right side of the field header) then select BLANKS. This will select all your QSOs where there is no MY QTH assigned
- Now mouse right click in the content of the MYQTH field on any QSO then select EDIT > CHANGE ALL QSOs
- Select the HOME_QTH then press OK to all messages and confirm the procedure.
- Now your logbook will be as it should be and you will be able to display all QSOs
Best 73