CLUSTER and STATISTICS

[EA3GCV]

Hi all,

You have created a Report instead of a new statistic. In order to make things easy I have made all the work for all of you...

Follow these steps:

1. Download the new statistic file: http://www.spanish.icap.ch/SWLSTAT.MDB
2. Copy this file in the Swisslog folder (overwriting the existing one).
3. You will now have 3 new standard statistics: DXCC-SSB, DXCC-CW and DXCC-RTTY
4. You have to open 3 different DX Cluster windows, one for each mode: In the first one you have to only select the statistic DXCC-SSB and select the bands you want but ONLY check the SSB mode. Apply a Title Height of 75 otehrwise you will only see DXCC as title instead of DXCC-SSB.
5. Open a second DX Cluster window, select only the DXCC-CW statistic, the bands you want and ONLY check the CW mode. Apply a Title Height of 75 otherwise you will only see DXCC as title instead of DXCC-CW.
6. Open a third DX Cluster window, select only the DXCC-RTTY statistic, the bands you want and ONLY check the RTTY mode. Apply a Title Height of 75 otherwise you will only see DXCC as title instead of DXCC-RTTY.
7. It's important that you have a well defined band plan in Edit | Edit band plan so that Swisslog can filter by frequency when a DX spot is received to know the right mode based on the frequency. This is also useful for rig control. So you have to define all frequency ranges for each mode in each band. By default the clean database included in the installer has a well defined band plan for the IARU Region 1 (Europe, Africa, Middle East and Northern Asia based in SSB, CW and RTTY modes.

You will have to check the different DX Cluster windows depending the mode you want to check the statistic status for each band.

I hope I have explained all this clear enough. If you have any doubt don't hesitate to contact me.

Best 73