Azimuth Indicator Pointer Won't move

[G4VJI]

Swisslog reads bearing every 750ms. This has to be done to avoid reading rotor changes of less than 5 degrees (gear tolerance).

Best 73

This might help Jordi, I changed the interface on the SPID to Hygain DCU1 pathfinder (the only choice of Hygain.
Rebooted the controller and restarted SWL:-
Now the rotor on the top shows the bearing from the Azimuth screen, when you click on another bearing on the Azimuth screen the red pointer moves to it and the Rotor bearing on the top changes as well.
Unfortunately the controller does not change the bearing on the rotator.
So almost there and I do have some hair left, am 73 next month so am doing well !!

73 de Cliff G4VJI