Changing the mode in the input window

[dl6lbi]

Hello Jordi,
First of all, a happy new year.
I have noticed the following error in the input window. The mode, e.g. CW to USB, is no longer adopted after switching on the TRX. The TRX display with the frequency at the top of the page is OK and is also displayed correctly when switching from e.g. CW to USB. However, this is not the case in the input window.

vy73 de Ingo

[EA3GCV]

Hello Ingo,

Make sure the "Do not set mode from TX" option in the QSO Entry window is not checked. This option is checked automatically when linked to external programs (such as WSJT-X. MiXW, FLDIGI) to set the right QSO mode and not radio mode because digital modes are all worked in USB. Swisslog reads this setting when the QSO Entry option is open. I do this to restore the "user setting" for this option when unlinked from external programs. I guess it's checked. Normally, when unlinked, Swisslog should restore the user setting for such option. But sometimes may fail. Once you uncheck this option, close then open the QSO Entry window again to "tell" Swisslog this is your default setting. Make also sure the Options / Save desktop at exit is checked.

73

[dl6lbi]

Hello Jordi,

That's it. Thanks for your help.

73 de Ingo