(24-02-2023, 10:15 PM)EA3GCV Wrote: Hi Bent,
This happens because OmniRig is polling radio all time to read both VFO by sending the FA; and FB; commands. Close all programs using OmniRig (such as Swisslog) then make sure Omnirig.exe is not loaded into memory (go to Task manager). Close it in case you find it. Edit the TS-590.INI file located in the c:\Program Files (x86)\Afreet\OmniRig\Rigs\ folder with a text editor (mouse right click then select EDIT). Find the READ STATUS section at the end of the file then add ; at the beggining of this section (just like this):
[STATUS3]
;Command=(FB
;ReplyEnd=(
;Validate=(FB...........
;Value1=2|11|vfText|1|0|pmFreqB
Save the INI then open Swisslog. Now you should only see the selected VFO of your radio.
Best 73
Hi
Thank you very much for info. My regular log is Log4om, but there are several things I like better in Swisslog so I am
trying it and comparing. If I modify my INI file, will this have an impact on Log4om? There I have both vfo´s shoving and I
am not interested in loosing it. If modifying will mess up Log4om, can I rename the file and just swap in omnirig before
I start Swisslog?
73 Bent LA0GE
