RTTY-PSK-JT65=DIGITAL Modes

[TA1DX]

Hello All,
First sorry for my english.

I am Using 5.8. Very long time...

My LOG is very detailed for digital modes.

I have many qsos for PSK31, PSK63, RTTY and JT65.

But, they are count for DXCC, only one name = Digital..

My Statistic page is very detailed, I can see confirmed RTTY, PSK or JT65, but I can't see, total confirmed for Digital mode.

I checked in my Digital confirmes are ARRL's LoTW page, but paper QSL cards are not seen in LoTW.

What am I doing??

Many tnx for interests..

Best 73!
Atila, TA1DX

[EA3GCV]

Hi Atila:

Swisslog can handle all this without any problems. First check the following:

- Go to Edit | Add / Edit Modes. In the QSO Modes tab make sure you have all the modes you are working (PSK, JT65, etc). Otherwise add a new entry for every mode you want.

- Afterwards go to the Report Modes tab. Select DATA in the Report Modes left column and select all the modes you want in the right column for this report mode. You can change the name DATA for Digital if you wish.

- Press Save and OK

That's all!!

Now when you want an statistic report for all the DATA (or Digital modes) simply perform the following:

- View | Statistic
- In the Awards tab select the statistic you want for the report
- Right in the Modes section mark the DATA (or Digital if you changed the name). Select another modes if you want.
- Press OK
- You will see a complete statistic report where DATA (or Digital) will include all the digitals modes you selected in the first step.

You can also use this in the DX-Cluster message window.

Best 73

[TA1DX]

Dear Jordi, OK, very good..

Many thanks for interests..

Atila, TA1DX, 73!

http://www.swisslogforwindows.com/forum/...iggrin.gif