New Country Table

[EI4KF]

The Country Table was amended 30 April 2025. Swisslog will prompt to update soon.

Changes to the table are the following added definitions:

TX5U = FO French Polynesia
WH6VL, KL7YK and KP2L = W USA
4U0IARU = OE Austria 
TO974REF = FR Reunion Is
RP80* = UAAS Asiatic Russia. Therefore RP80 calls will default to UAAS. Exceptions are:
RP80BF and RP80VPO = UA2 Kaliningrad
RP80A, AU, FAW, MU, NK, PL, PT, RK, X, LSV and PM are all UAEU European Russia

Note: the above RP80 calls are the ones that I have been advised of. There may be others. SWL will assign UAAS but I recommend you check and amend DXCC if necessary.

73 de Erik.

[EI4KF]

Jordi might be very busy and hence why Swisslog has not yet prompted for the update. For those chasing the Diploma for the 80th Anniversary xx80 prefixes (RP80, EV80, UQ80, etc) and needing the update, please download the attachment. Unzip in your C:\Swisslog\DB directory and overwrite the existing file. When the prompt comes through, download as normal.

Erik.

[EA3GCV]

Hi,

Sorry for the delay but I was out of home! just released!!

73

[EI4KF]

The Country Table was amended 30 April 2025. Swisslog will prompt to update soon.

Changes to the table are the following added definitions:

TX5U = FO French Polynesia
WH6VL, KL7YK and KP2L = W USA
4U0IARU = OE Austria 
TO974REF = FR Reunion Is
RP80* = UAAS Asiatic Russia. Therefore RP80 calls will default to UAAS. Exceptions are:
RP80BF and RP80VPO = UA2 Kaliningrad
RP80A, AU, FAW, MU, NK, PL, PT, RK, X, LSV and PM are all UAEU European Russia

Note: the above RP80 calls are the ones that I have been advised of. There may be others. SWL will assign UAAS but I recommend you check and amend DXCC if necessary.

73 de Erik.

A note about RP80 callsigns. I omitted these from the update, intending to research whether the majority were UAEU or UAAS. Very few of them are on qrz.com and the split between those that are listed is 50/50. Therefore they stay omitted. When logging them, assuming the DXCC can be established, enter your own DXCC assignment. The default for the country table, and therefore logging, is UAEU as this is more likely. In the DX Messages window, they should show with a white square denoting DXCC is to be established. This is so SWL users are not misled as to the actual DXCC when viewing DX Spots.

I hope this makes sense. I am not sure it does but that is it unless anyone has a better suggestion (that doesn't cause me more work!).

Erik.