DX Messages window slow.

[G4UGB]

Hello Jordi,

Thank you again for your reply.

Sometimes - SWL will exit and shut down as normal with no problems with the rotator interface connected. But the problem is of course that once locked out (after an attempted shut down) I cannot get to the menus !! So it seems that the rotator interface disconnect code is working correctly sometimes. But I will monitor it.

It is perhaps that the associated COM Port gets disconnected and SWL cannot find it - but then - as soon as I disconnected the ERC mini USB connector to the PC - SWL instantly closes down.

So it is strange one !! But I will re-check the COM port settings and see if I can trace the problem.

*EDIT* Forgot to add - once SWL locks out - it cannot be shut down until the PC is restarted. Task Manager won't close it down. Which is also strange.

Thank you again for your help.

Regards,

Richard G4UGB