Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Country Table Update
01-02-2019, 05:03 PM, (This post was last modified: 01-02-2019, 11:16 PM by EI4KF.)
#1
Country Table Update
The Swisslog Country Database was updated 1 February 2019.

TO2BC was added to the definitions for FY French Guiana.

Resulting from a user log that was passed through the Club Log DXCC corrections routine, then forwarded to me by Jordi, the following definitions have been added:


GB18FIFA DXCC: GI
II0IDP DXCC: IS
RI1ANM DXCC: KC4
RC18KA DXCC: UA2
R2014C DXCC: UAEU
R2015BA DXCC: UAEU
R2015Y DXCC: UAEU
R20ARRS DXCC: UAEU
R20MSK DXCC: UAEU
R20QYA DXCC: UAEU
R20RCC DXCC: UAEU
R20VRN DXCC: UAEU
R22CRC DXCC: UAEU
R25RLHA DXCC: UAEU
R25RRC DXCC: UAEU
R25SRR DXCC: UAEU
R26MDXC DXCC: UAEU
R80RTL DXCC: UAEU
R90IARU DXCC: UAEU
RA27MM DXCC: UAEU
UE25FO DXCC: UAEU
RN22DY DXCC: UAEU
RO25RO DXCC: UAEU
RO25SP DXCC: UAEU
RC2ZC DXCC: UAEU
RG22LG DXCC: UAEU
RO80RO DXCC: UAEU
UE95GA DXCC: UAEU
RJ17WG DXCC: UAAS
RK56GC DXCC: UAAS
RL19WF DXCC: UAAS
RO25TN DXCC: UAAS
RQ110RAEM DXCC: UAAS
RQ17WG DXCC: UAAS
RT60RT DXCC: UAAS
RT65KI DXCC: UAAS
RT92KA DXCC: UAAS
RU17NY DXCC: UAAS
RW55YG DXCC: UAAS
RW80SP DXCC: UAAS
RY22MC DXCC: UAAS
RY80SP DXCC: UAAS
UE23DZO DXCC: UAAS
RC18EK DXCC: UAAS
R1716M DXCC: UAAS
R18RUS DXCC: UAAS
UE44Y/9 DXCC: UAAS
UE70AAA DXCC: UAAS


The update can be downloaded here: 
.zip   Swlctry.zip (Size: 673,64 KB / Downloads: 24)

Erik.
Reply
02-02-2019, 03:55 PM,
#2
RE: Country Table Update
Thank you very much Erik!!!
Jordi, EA3GCV
Current developer of Swisslog
Reply
03-02-2019, 01:48 PM,
#3
RE: Country Table Update
Thank you very much for the update,

But I tested the most Russian Callsigns and it work all OK.

Only for TO2BC he shows me no country ??

Can you help me please?
Thank you very much.

73, Alain LX1AX
Reply
04-02-2019, 01:22 AM,
#4
RE: Country Table Update
(03-02-2019, 01:48 PM)LX1AX Wrote: Only for TO2BC he shows me no country ??

Same here Alain.  I do not make amendments to country table as Erik does a great job with regular updates so I guess he will check this one.

Reg
G3WPF
Reply
04-02-2019, 11:13 AM,
#5
RE: Country Table Update
(04-02-2019, 01:22 AM)G3WPF Wrote:
(03-02-2019, 01:48 PM)LX1AX Wrote: Only for TO2BC he shows me no country ??

Same here Alain.  I do not make amendments to country table as Erik does a great job with regular updates so I guess he will check this one.

Reg
G3WPF

It is supposed to not show a country.

Some special callsigns are valid only for limited periods and can even be valid for different DXCCs at different times.

The next TO2BC operation is advertised as being from 21 March to 2 April, according to DX-World. My definition update will allow Swisslog to show TO2BC as FY on those dates (plus a few days either side). Outside of those dates, TO2BC is invalid and hence is currently no country in Swisslog.

I also had an email from Jordi about multiple dates for the same callsign. I regret that the way the country table works, the latest update to the same callsign over-writes any previous data. But I do not see that as a problem - for historic operations you either worked it in which case it was logged correctly or you didn't in which case it does not matter. It the event that you are importing historical data into Swisslog, please avail yourself of the 'Set DXCC From Club Log' routine which will automatically change incorrect DXCC assignments in your log.

I trust this is clear but, should it not be so, do email me directly and I will do my best to help.

Erik.
Reply
04-02-2019, 03:35 PM,
#6
RE: Country Table Update
(04-02-2019, 11:13 AM)EI4KF Wrote:
(04-02-2019, 01:22 AM)G3WPF Wrote:
(03-02-2019, 01:48 PM)LX1AX Wrote: Only for TO2BC he shows me no country ??

Same here Alain.  I do not make amendments to country table as Erik does a great job with regular updates so I guess he will check this one.

Reg
G3WPF

It is supposed to not show a country.

Some special callsigns are valid only for limited periods and can even be valid for different DXCCs at different times.

The next TO2BC operation is advertised as being from 21 March to 2 April, according to DX-World. My definition update will allow Swisslog to show TO2BC as FY on those dates (plus a few days either side). Outside of those dates, TO2BC is invalid and hence is currently no country in Swisslog.

I also had an email from Jordi about multiple dates for the same callsign. I regret that the way the country table works, the latest update to the same callsign over-writes any previous data. But I do not see that as a problem - for historic operations you either worked it in which case it was logged correctly or you didn't in which case it does not matter. It the event that you are importing historical data into Swisslog, please avail yourself of the 'Set DXCC From Club Log' routine which will automatically change incorrect DXCC assignments in your log.

I trust this is clear but, should it not be so, do email me directly and I will do my best to help.

Erik.

After mentioning the limitation in the country table, Jordi fixed it! So a new table can be downloaded from the link below. It already contains historic data for TO2BC and as historic information come to hand for other existing callsigns, I will also add them to the table.


.zip   Swlctry.zip (Size: 719,82 KB / Downloads: 18)

Erik
Reply
09-02-2019, 01:24 PM,
#7
RE: Country Table Update
Thank you Erik and Jordi for your help.
I have also  update this last table,and replaced the one before, but until now TO2BC doesn't show me a country. I think I'm waiting until the date of the the DX-pedition.
Because I don't know what I have done wrong.
Thank you, have all a nice WE.
73, s LX1AX
Alain
Reply
09-02-2019, 02:31 PM,
#8
RE: Country Table Update
Alain, TO2BC is recognised since 21st March until 2nd April this year and 17-18 and 24-25 March 2018. Simply disable realtime entry (double click on the date field to see field background colour in white instead of yellow) and manually enter a date between this range. Enter this callsign and you will see it's perfectly recognised. Out of the activity dates this callsign is not recognised thus DXCC is blank.

73
Jordi, EA3GCV
Current developer of Swisslog
Reply
09-02-2019, 04:06 PM,
#9
RE: Country Table Update
Hi Jordi,
Thank you very much for your great support.
I have done it and it works like you say correctly in this date range.

73's Alain LX1AX
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)