Setting up Swisslog and WSJT-X for communication with IC7300

[JW6VDA]

Thanks for putting me on the right track, Jordi.
Your settings worked, almost, but not completely.
WSJT-X  settings: as you suggested.

On the radio, this works:
CI-V baudrate = Auto
CI-V address: 94h
CI-V Tranceive = ON
CI-V -> Remote tranceive address =94h
CI-V Output (for ANT) = OFF
CI-V USB Port = Unlink from (Remote)
CI-V USB Echo Back = ON
USB Serial Function = CI-V

The OmniRig settings: As you suggested.

Now, the thing that I never understood, but it seems to do the trick:
In Swisslog Tranceiver Interface, I also chose OmniRig Rig 1. Rig 2 will not connect.

Som com0com is not necessary and has been uninstalled, same as VSPE.

Anyway, for the first time since I bought my IC7300 and started using WSJT-X, both Swisslog and WSJT-X "sees" the tranceiver frequency!

So I am one happy customer, as long as this works. Of course, the discrepancy between your settings and mine, i will look into them, if you feel that there are essential faults in my settings, I will try your settings out, one at a time.

73 de Tom OH6VDA