Hi Jordi,
I will test the Beta version once I got a few more QSLs on LotW. Thank you!
And OK on the realtime setting. Thanks for the detailed information.
However I cannot confirm that it calculates the distance on imported QSOs with 4-digit locators. I have just tested this again with a short file. My locator is set to the correct one in MyQTH and corresponds to the one in the ADIF file (although capitals are different: IO83TK in MyQTH, IO83tk in the ADI - could that be it?).
The file is as follows:
Generated for G0SYP
<ADIF_VER>:5>3.0.9
<PROGRAMID:20>Swisslog for Windows
<PROGRAMVERSION:5>5.99a
<CREATED_TIMESTAMP:15>20190415 114238
<EOH>
<call:5>SP3UZ <gridsquare:6>JO92fg <mode:3>FT8 <rst_sent:3>-04 <rst_rcvd:3>-03 <qso_date:8>20200116 <time_on:6>114630 <qso_date_off:8>20200116 <time_off:6>114729 <band:2>6m <freq:9>50.314726 <station_callsign:5>G0SYP <my_gridsquare:6>IO83tk <eor>
<call:6>SP8BJZ <gridsquare:4>KO01 <mode:3>FT8 <rst_sent:3>-13 <rst_rcvd:3>-15 <qso_date:8>20200116 <time_on:6>114900 <qso_date_off:8>20200116 <time_off:6>114959 <band:2>6m <freq:9>50.314726 <station_callsign:5>G0SYP <my_gridsquare:6>IO83tk <eor>
It correctly calculates 1400km to JO92FG but leaves the distance to KO01 as 0 in the log.
73 Carsten
