Posts: 7
Threads: 3
Joined: Dec 2015
Reputation:
0
LOTW Configuration
Hello,
I bought a new computer and installed the last version of Swisslog. For most of the functions it works fine but I have a problem in preparing the LOTW configuration for Swisslog.
I followed the instructions but I cannot proceed as it should.
I insert a screen shot to explain the situation.
I am not able to fill the last field "QTH" I cannot write in it and do not know any other way.
What am I doing wrong ?
Thank you for any help.
Posts: 1.689
Threads: 147
Joined: May 2013
Reputation:
12
RE: LOTW Configuration
Hello,
There is no screenshot attached. Please read carefully the following chapters in the Swislsog help (I insert direct links for these chapters in French):
You have to install TQSL, request LoTW certificate, activate it then create a station location. Later in the LoTW configuration you have to link the station location with your My QTH. Read carefully the above links please.
Posts: 7
Threads: 3
Joined: Dec 2015
Reputation:
0
RE: LOTW Configuration
Hi Jordi,
Many thanks for your prompt reply.
I appreciate very much.
Here more information :
- TQSL is installed
- Certificate is installed and it works.
- I have no problem to upload my QSO's as an ADIF file
- From the "operations LOTW" (in french) when I click on"open LOTW page", it works . I can check my QSO's QSL's etc.
- But I cannot download my QSL's to synchronize with my Swisslog log. That's my problem.
I try to attach the screen shot I was talking about in my previous post
Posts: 1.689
Threads: 147
Joined: May 2013
Reputation:
12
RE: LOTW Configuration
Hello,
In the Station LoTW column you have to sleect the station location created in TQSL. Please make sure LES COMBES is created as station location in TQSL and associated with your current certificate.
If you still have problems send me a whatsapp to +34 656409020 to arrange a Teamviewer session to check online what may happen.
Posts: 7
Threads: 3
Joined: Dec 2015
Reputation:
0
RE: LOTW Configuration
(03-12-2020, 12:38 PM)EA3GCV Wrote: Hello,
In the Station LoTW column you have to sleect the station location created in TQSL. Please make sure LES COMBES is created as station location in TQSL and associated with your current certificate.
If you still have problems send me a whatsapp to +34 656409020 to arrange a Teamviewer session to check online what may happen.
Best 73
Helo Jordi,
Many thanks for your reply. I'll double check. I appreciate very much your proposal. Of course your action through Teamviewer would be a great help. I will revert to you tomorrow.