Swisslog's Forum - General discussion

ADIF country numbers

Thu, 02 Apr 2026 14:44:24 +0000

Pse ,
in whitch table of Swlog_v5.mdb I can find the ADIF country numbers

TIA

73 de SV1FTY Sotiris

How adding FT2 mode in Swisslog?

Fri, 20 Feb 2026 10:24:24 +0000

Hi all,

A new mode has come into scene this week: FT2:

https://www.ft2.it/

If you are testing this new digital mode, you can easily add it in Swisslog in Edit > Add / Edit modes

VERY IMPORTANT! this mode is not "official" and still not accepted by the ADIF Comittee (where I'm member). Currently there is an important discussion on this group because seems the author of this mode has violated the WSJT License. Joe Taylor has not accepted this mode to be named as FT2 but MM2, based on the initials of the author of this software. Chaos is served! While all this is not clarified, I suggest you to avoid uploading QSOs to LoTW, eQSL, any other online service or exchange FT2 QSO to other applications until this mode is officially accepted and included in a new ADIF specification version. I will release a new Swisslog version when this happens.

73

Transceiver interface

Sat, 07 Feb 2026 15:01:41 +0000

I must be missing a step. I have two Flex radios on my network. They each have fixed IP addresses.
When I enter both radios in the transceiver interface, everything looks good. However, when I try to change radios, i see that both IP address are the same now. Whenever I change one IP address, the other one changes to that address also.I can work around it by just putting in the correct IP for the radio I want to use and clicking Start, But the other radios address will also change. Not big deal but i feel like I am doing not something to set the address right.
Thanks for any ideas.
Tom
N9RU

local time vs UTC

Thu, 15 Jan 2026 21:13:15 +0000

Hi

I going to switch my old paper logbook to swisslog. In those time I wrote my QSO in local time.

So the question is : how to input a QSO with local time and get automatiquely the UTC time in the log.

Thanks for any help.
73. Bruno F5ADL.

QSOs in FLDIGI are not saved

Sat, 10 Jan 2026 15:28:24 +0000

Hello,

Since reinstalling SWISSLOG, QSOs from FLDIGI have not been transferred to the log. The connection appears to be established, as indicated by the green dot next to the FLDIGI icon in the Swisslog QSO window.
Right-clicking on a call sign in FLDIGI displays it correctly in both FLDIGI and the Swisslog QSO window. However, when I click 'Save' in FLDIGI, the fields in the Swisslog QSO window are deleted and the QSO is not saved in the logbook.

I couldn't find anything in the Swisslog help section on the Digital Modes Interface.

Does anyone have any idea what could be causing this?

Thanks and 73
HB9TZU

WSJT-X + SWL TRX

Fri, 09 Jan 2026 15:06:45 +0000

Hi,

I'm starting to look at digi modes and installed WSJT-X. After configuring it seems all is working and it's "talking" to the radio and Swisslog, however, when I start WSJT-X it follows the radio but Swisslog throws an error about conflicting COM6. Shutting down WSJT-X lets Swisslog communicate with redio again but after restarting WSJT-X it no longer displays the TS-480 frequency.

Anything I'm doing wrong? Should WSJT-X get the frequency from SWL? I guess only one program can use a COMport at the same time.

Error when lunched Swisslog

Sun, 04 Jan 2026 17:37:11 +0000

Hi
Since faw days I can't run anymore Swisslog.
With eventvwr I have tried to look why and I have this error message

Nom du journal :Application
Source : Application Error
Date : 04/01/2026 18:31:32
ID de l’événement :1000
Catégorie de la tâche :Événements d’arrêts inattendus d’applications
Niveau : Erreur
Mots clés :
Utilisateur : HAMRADIO\on6dp
Ordinateur : HAMRADIO
Description :
Nom de l'application défaillante : SwisslV5.exe, version : 5.114.0.0, horodatage : 0x2a425e19
Nom du module défaillant : SwisslV5.exe, version : 5.114.0.0, horodatage : 0x2a425e19
Exception code: 0xc0000005
Fault offset: 0x00008454
Identifiant du processus défaillant : 0x1910
Heure de début de l'application défaillante : 0x1DC7D9FEBFCEAE2
Chemin de l'application défaillante : C:\Swisslog5\SwisslV5.exe
Chemin du module défaillant : C:\Swisslog5\SwisslV5.exe
ID du rapport : 3afa7167-59ea-4841-99cf-4275c4bb5559
Nom complet du package défaillant :
Package défaillant – ID d'application relatif :
XML de l’événement :

1000
0
2
100
0
0x8000000000000000

36403

Application
HAMRADIO

SwisslV5.exe
5.114.0.0
2a425e19
SwisslV5.exe
5.114.0.0
2a425e19
c0000005
00008454
0x1910
0x1dc7d9febfceae2
C:\Swisslog5\SwisslV5.exe
C:\Swisslog5\SwisslV5.exe
3afa7167-59ea-4841-99cf-4275c4bb5559

How can I resolve that problem ?
Thanks
73 Paul ON6DP

FTX-1

Thu, 25 Dec 2025 10:16:57 +0000

How can I integrate an FTX-1 into Swisslog?
I've tried all the Yaesu options, but none of them work.
I have no experience with other options like Omnirig.

Can anyone help me with this?

Thanks in advance.

vy 73 de Ingo, DL6LBI

No infos in stats nor messages dx cluster

Thu, 18 Dec 2025 07:32:29 +0000

Hello,
I have no statistics infos, in any stats functions nor in messages dx cluster.
I have had issues in stats infos for a very long time, but I could still have infos of DXCC worked in messages dx cluster.
Now I haven't any infos anymore.
What's wrong in stats and messages dx cluster ?
73 F5RAB Antoine
2025 12 18 messages DX cluster et stats vides.JPG (Size: 139,77 KB / Downloads: 5)

FT991A with Swisslog

Sun, 30 Nov 2025 17:19:11 +0000

Hi all,

I'm a little lost with the transceiver setting in Swisslog for my ft-991A

Normally, with wsjtx and mshv, I use COM6 (usb cable) no parity, 9600 bauds, eight bits, 2 stop bits ...and it works. Here, can't get the frequency in swisslog ?

Any idea ? the standard FT-990 does not work....

73 Guy F6DKQ

note : Swisslog beeing alone, without anything else, I was operating for the CQ WW CW

"Initial QSO" calculation

Wed, 26 Nov 2025 22:20:44 +0000

Hi All,
Is there any easy way to make a list per band of all "Initial QSO": The first time we QSO one specific call per band.
Thanks in advance for advice
Best 73's F5jwf

Moving Columns in Log View

Mon, 24 Nov 2025 07:19:33 +0000

Move Columns
I cannot seem to Click and Drag columns in the Log book view
I click the header and drag the mouse but nothing happens.
What am I doing wrong?
73
Ian G4GIR

LOTW Synchronization...

Wed, 05 Nov 2025 15:02:00 +0000

Hello Jordi,

I've been using Swisslog for a year, and the latest version is 5.113 on Windows 10.
My QSL cards are usually sent via E-QSL, no problem.

I'd like to use LOWT, but the synchronization isn't working.

1/ I can log in to TQSL (version 2.8) without any problem (but today I have no QSO recorded in TQSL, excepted my old QSL cards for DXCC manualy recorded from 40 years ago...)

2/ My call certificate is valid until 2028, and it's correctly displayed in TQSL.

3/ On the Swisslog CONFIGURATION page, my TQSL login information is correctly entered at the bottom of the page ("LOTW web user" and "web password").
But nothing appears below "certificate Callsign" or "password"; I can't enter anything below these fields.

4/ Station QTH: only one line, LOTW station = NONE, My QTH name = my city, QTH call = my call; QTH = nothing

5/ Bands = nothing, Modes = nothing, Prop = nothing

I suppose my synchonization is not clear.... ?

I deleted the file C:/swisslog/LOTW/SWL_LOTW.ini, but it didn't help.

I suppose I've forgotten something somewhere... hi

best 73

Chris

Edit :

I found my mistakes.

1/ The LOTW call certificate file wasn't in the right place in my computer.

2/ I confused it with "my QTH" (not easy...).

3/ The certificate password is the same as the one required to log in to TQSL (I thought it was different).

Just a little more effort and it'll be good...

Change own callsign in existing logs

Sun, 26 Oct 2025 14:04:14 +0000

Hi,

on the 16th of Feb last Year my call changed from DO8RP to DM1RP.
Unfortunately, I forgot to update my call in Swisslog and kept on logging as DO8RP.
Is is possible to change the call for the QSOs from that date on?
I haven´t exported or uploaded any of those QSOs to LOTW (or anything else) yet.

Thank you

Regards Rainer DM1RP

QSO records have disappearred from the log list

Mon, 20 Oct 2025 15:09:19 +0000

Hello,

I've been using Swisslog for a year and the latest version is 5.113 with W10.

I've never had any problems.

But today I note that some QSOs have disappeared from the main log list...

Example: I contacted F5VV and I add this contact, no problem to add this record and the "all previous QSOs" appear correctly.

But all QSOs with F5VV have disappeared from the main log list. It's the same for some other calls contacted several times.

I tried restoring my last backup, without success. I tried sequencing, without success.

Where is my mistake? Any help would be welcome....

Chris