Posts: 32
Threads: 9
Joined: Jun 2013
Reputation:
0
5.99E and transceiver
Hi, Hny et tnx for the new version.
I just installed the new version 5.99e
From Swisslog, the control of the transceiver data - frequency and mode - (placed at the top of the screen) no longer works. Also, the information sent by the transceiver is no longer updated as soon as the frequency is changed from Swisslog.
73
Posts: 1.689
Threads: 147
Joined: May 2013
Reputation:
12
RE: 5.99E and transceiver
Hi,
Which interface are you using? I haven't changed anything on this matter and here is working well in all my computers. What does "no longer works" means? Please explain in detail.
Please replace the EXE file by the new one which is correcting a bug:
Posts: 32
Threads: 9
Joined: Jun 2013
Reputation:
0
RE: 5.99E and transceiver
I installed the patch.
I use the serial interface (COM1).
At startup: changing the frequency and mode from the transceiver works well: there is indeed an update in Swisslog (control window) and inlay at the top of the screen (we only see two boxes, the frequency and mode).
With the patch, we see again in this second window the arrow to choose the mode. And it works !
In the "DX message" window, everything works correctly: I can order the transceiver from an ad.
There remains the programming of the frequency or the mode, in one of the two windows which is not done. And, if after this test, I "spot" from the DX window, I order the transceiver, but no update in both windows, and I can no longer make a mode change in these windows.
Posts: 1.689
Threads: 147
Joined: May 2013
Reputation:
12
RE: 5.99E and transceiver
Hello,
Which option are you selecting in the transceiver control of Swisslog? COM port direct to any transceiver? Omnirig, HRD?. PLEASE I need all the info as possible. I don't have any issue here in none of my computers and I haven't received any report from any user regarding this. If you connect directly to the COM port make sure you are using the right COM port parameters (baud rate, start and stop bits etc). A screenshot will help me to understand and see clearly your setup! I'm lack of information!
You have to press the SET button (ACCORD in French) after you change the frequency by means of the Up and Down button.
Posts: 32
Threads: 9
Joined: Jun 2013
Reputation:
0
RE: 5.99E and transceiver
Hello Jordi,
Thanks for taking care of this little problem.
My connection parameters with a Yaesu FT1000 MP for more than 15 years :
- COM1 port, single use of Swisslog to control the transceiver
- Port configuration: see jpg
- Automatic start
- Display of the tx in the toolbar
In the control window, the up, down and chord keys do not work. An error code is displayed (see jpg).
Posts: 1.689
Threads: 147
Joined: May 2013
Reputation:
12
RE: 5.99E and transceiver
Hello Jean-Marie,
I have detected the source of the issue: thousand separator in your country is different than comma or dot and I didn't take this into account! Thousand separators are set automatically after entering the frequency manually (yes, it must be entered in Hertz without any separator, Swislsog will assign it correctly after that). It will be corrected in version 5.99f which I'm planning to release shortly!