New Callsign in QSO Window show QSL card - Printable Version +- Swisslog's Forum (https://www.swisslogforwindows.com/forum) +-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3) +--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6) +--- Thread: New Callsign in QSO Window show QSL card (/showthread.php?tid=965) |
New Callsign in QSO Window show QSL card - do5rbb - 04-01-2022 Hi there! If I enter a new callsign in the QSO window, it automatically opens a eQSL Card from my QSO Partner if I had a QSO with the other ham. How could I stop that? 73, Ralf RE: New Callsign in QSO Window show QSL card - EA3GCV - 05-01-2022 Hi Ralf, This is not the eQSL card but the profile image of the QSO partner taken from the internet Callbook database you have selected (HAMQTH/QRZ/QRZCQ). You can disable this in the Options of the Add QSO window. Read the Qso Entry > Options for Edit QSO or follow this link where this is explained: https://www.swisslogforwindows.com/english/Help/QSO%20Entry/Option%20Edit%20QSO.htm Show Callbook image profile automatically (if available) When this option is set Swisslog will automatically open the image viewer if there is a profile image available when retrieving Callbook info from QRZ/QRZCQ (subscription needed) or HAMQTH (free). Best 73 RE: New Callsign in QSO Window show QSL card - do5rbb - 08-01-2022 Hi Jordi! Yes, you are right. It works. I can't remember that I activate the Option :-) Tnx and vy 73 Ralf RE: New Callsign in QSO Window show QSL card - EI4KF - 08-01-2022 (08-01-2022, 11:26 AM)do5rbb Wrote: Hi Jordi! You probably did not activate it, Ralf. There seems to be a defect in the 5.103 installation. If I uncheck that setting, install 5.103, the setting is turned on. I did nothing to it and I suspect you did not do anything either. Maybe this problem does not happen in all environments which can explain why we are the only ones to report it. 73 de Erik. RE: New Callsign in QSO Window show QSL card - do5rbb - 13-01-2022 (08-01-2022, 03:00 PM)EI4KF Wrote:(08-01-2022, 11:26 AM)do5rbb Wrote: Hi Jordi! You are absolute right Erik! I deactivate it and after a new start it is already activated. Maybe a mapping problem, typo error?, because it isn't also translated in german: 73 de Ralf RE: New Callsign in QSO Window show QSL card - EA3GCV - 14-01-2022 Hi, Just keep in mind that in order settings are being saved, the Options / Save desktop at exit must be checked. Otherwise changes won't be saved for the next session. It works perfectly here. Best 73 |