Hello,
I don't understand when you say "downloaded". You can only "upload" QSO from Swisslog to HRDLOG.
If you change the QSL received indicator in Swisslog AFTER you have uploaded the QSOs to HRDLOG, you will have to Upload all QSOs again. But first you have to set the field L_HRDLOG_QSO_UPLOAD_Status to 0 (Swisslog will only upload QSOs not uploaded previously and this field is used to handle this):
- Go to View / Logbook view (selection)
- Select the query Status Online logbook from the Logbook folder.
- Filter the HRDLOG_QSO_UPLOAD_STATUS to display all QSOs having 1 (checked). Open the arrow in this field and select 1.
- Afterwards, mouse right click on any content of this field (not the field header) then select Edit / Change all QSOs
- Set 0 to this field and press OK to all confirmation messages. All filtered QSOs will be set to 0.
Now you can Upload again all your logbook into HRDLOG from Tools / HRDLOG > Upload logbook.
Please read the chapter Multipe QSO Update from the Swisslog help or click on the following link:
https://www.swisslogforwindows.com/frenc...Update.htm
Best 73
