Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
dxcluster submit for finished qsos
08-06-2019, 07:20 PM,
#1
dxcluster submit for finished qsos
Hello,
Specially for VHF and upper frequencies, it is nice to spot the qso to dxcluster with propagation mode etc after the qso completed.

There is spotting function which works as  type the call, press spot and send the spot msg. 
What i ask (if you accept) 
to send the dxspot information after the qso completed (automatically or better manually from the last qso /logbook view part) 
with the standard format  "locator<prop>locator comment"

as :
 
TA2NC (KM69HU) 144.128.0 JT65 S58M (JN76ID) 1610 km EME   KM69HU<EME>JN76 tnx qso

Only Comment part should be formatted this way.(that i marked underline) 

As i mentioned before it is important for VHF and upper fq. qsos.
Reply
08-06-2019, 07:48 PM,
#2
RE: dxcluster submit for finished qsos
Hello,

In the Add QSO window there is a button to send Dx anmouncements directly to the connected Telnet server where you can set comments and all you need. Button shows the word DX with a yellow arrow Please read the QSO Entry chapter in the Swisslog help.

Best 73
Jordi, EA3GCV
Current developer of Swisslog
Reply
08-06-2019, 08:18 PM,
#3
RE: dxcluster submit for finished qsos
Hello Jordi.
Actually I mentioned on my message that there is a spot button (that you described) which is not very practical for the things i mentioned...
So I read it and I actually use it.
Thats why..it is on wish list..

During a pileup..it is not practical, type callsign, select propagation, get locator of dx station..
then type it on spot windows as km69<SPE>xxyy send.. and go on qso...

Format is important because it is used on propagation analysis for MUF estimation on VHF DX tools..
It is not just spotting somebody..It is for spotting your own qso also for propagation analysis on upper bands..


It is much much more practical just right click a finished qso and send spot
Most of the log programs i previously used had such send spot button on qso list.. not on add qso window..

Anyway.. Nice to have.. i hope you put it on the to do list also.

Regards.
Reply
08-06-2019, 08:38 PM,
#4
RE: dxcluster submit for finished qsos
Additionally, to give an example.. I am sharing the 144 mhz (50 and up is much more same)

Pse check the remarks..

   
Reply
09-06-2019, 05:44 PM,
#5
RE: dxcluster submit for finished qsos
Hi,

Oh now I understand. Could you please let me know which software does this as you require? I would like to see how it's performed in order to see how can I implenent it in Swisslog.
. B

est 73
Jordi, EA3GCV
Current developer of Swisslog
Reply
09-06-2019, 06:45 PM,
#6
RE: dxcluster submit for finished qsos
Main support from EA6VQ VQLog mostly..I havent used it..just saw on comments..

Additionally As a log software ur5eqf does this..(not this special format but spotting after qso over from list)
MSHV-not a logger actually-- does this (Both pskreporter submission and also right click on any decoded msg to spot with propagation type and locators)

And if any necessary information about format, you can check http://vhfdx.eu/about.php
Or https://mmmonvhf.de/minibb/index.php?act...=88#msg197

Thank you for your kind effort.

Regards
Reply
10-06-2019, 01:18 AM,
#7
RE: dxcluster submit for finished qsos
Ok I will take a look and I will study how can I do it. I will add it to the wish list.

Best 73
Jordi, EA3GCV
Current developer of Swisslog
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)